We are advertizing stocking and distributer of Gal Gauge Co USA India

WELDING INSPECTION TOOL KIT.

We Bolster Engineering Solutions Pvt Ltd introducing a specifically designed welding Inspection Kit targeting the requirements of a stringent welding quality requirements specified in ISO 15085, ISO 3834 ,ISO 5817, AWS D1.1, ASME etc.

WHY THIS KIT SO IMPORTANT ?

1. A complete welding inspection Kit
2. Compact
3. Shock proof
4. To perform visual weld inspection against international standard.
5. Affordable price in market.
6. Customization provision available.

WHY BOLSTER ENGINEERING SOLUTIONS PVT LTD ?

1. We provide this gauges under one focal point with in affordable price.
2. We understand your requirements and customize as per your need.
3. Our ASNT Level 3/International welding engineer ( IWE) will provide you customized training session to familiarize the gauges to your needs.
4. Upon requirements we provide NDT level 2 training program to certify your engineers against ASNT SNT TC1A requirements.

WHAT WE PROVIDE IN THIS KIT

BRIDGE CAM GAUGE

It allows measuring of

- height of flat weld

- height of fillet weld bead

- thickness of fillet weld

- bevel angle of weldment

- undercut depth of weld seam

- vertical misalignment

WAC WELD GAUGE

SKEW FILLET GAUGE

Use for:
• Checking Angle of Vertical Member
• Checking Weld Acute Side
• Checking Weld Obtuse Side
• • CALCULATOR • •
A handy compilation of mathematical relationships between leg length, throats, skew angles and inspection dimensions. A must for designers and inspectors.

HIGH LOW GAUGES

• Measure internal misalignment

• Measure fil-up gap

• Measure bevel on end preparation

• Measure the crown height of welds

• Measure fillet weld size

• Measure scribe line socket welds

TAPER WELD GAUGE

The range of measured holes - 0-15 mm

Accuracy - ± 0,1 mm

TELESCOPIC MIRROR

STANDARD FILLET GAUGE

A set of templates for the legs of the angular control of welded joints as well as for
measuring the convexity and concavity of the seam.

Measuring range - 3.2 - 25.4 mm
Accuracy: ± 0,1 mm / ± 0,005 "
Number of templates - 7 units
Material - stainless steel

VERNIER WELD GAUGE

Designed to measure the convexity of the weld angle edge preparation connected parts corner and butt welds, bevel edges in the preparation of the welded joints of parts, measuring the height of fillet weld leg,

range - 0-20 mm
resolution - 0,01 mm
angles - 60 / 70 / 80 / 90 C

VERNIER WELD DIGITAL GAUGE

Designed to measure the convexity of the weld angle edge preparation connected parts corner and butt welds, bevel edges in the preparation of the welded joints of parts, measuring the height of fillet weld leg

With LCD display, will hold either the zero setting or measured value at any position for differential measurements.
range - 0-20 mm
resolution- 0,01 mm
power – battery SR 44 (1,55 V)
dimension size - 100х64х14 mm
angles - 60 / 70 / 80 / 90 C

KEY FILLET GAUGE

Features:
Pocket size - Measures 8 size fillets
Checks leg length, throat size, plus allowable convexity
All increments permanently engraved
Each welder can carry a set for pre-inspection
Handy key chain holds set together

Material: stainless steel
Thickness of the fillet weld:
4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm
Fillet Weld Size:
4mm,6mm, 7.5mm, 10mm, 12mm, 14mm, 16mm, 18mm
Accuracy: ±0.5mm
Weight: 20G

INFRA RED THERMOMETER

Measurement Range: -50-380 Degree Celcius.

Temprature Range upto 380 C

Emissivity: 0.95 (fixed), Display Resolution: 0.1°C, Distance
To Spot Size: Ratio:- 12:1

Auto power off & Data hold Laser on/off selectable
Backlight on/off selectable

SKEW GAUGE WELD CALCULATOR

A handy compilation of mathematical relationships between leg length, throats, skew angles and inspection dimensions. A must for designers and inspectors. The perfect companion to the Skew Fillet Weld Gauge.

Replaces all other sets of gauges to measure fillet or groove welds in skewed members or members at 90 degrees.

AWS AUTO WELD GAUGE

Rapidly measures weld features like tolerance of convexity, tolerance of reinforcement, concavity and underfill, to determine size of fillet weld.

Scales are graduated in metric units

MAX-MIN - 0-3 mm
MAX CONCAVITY – 0-20 mm
MAX CONVEXITY – 0-20 mm
LEG LENGTH - 0-20 mm